Belden 50106F , Cable STP cat 6 / kabel FTP / Kabel STP Cat6 Outdoor
Rp6.500.000
50106F BELDEN Industrial Shielded Cable UTP Cat. 6 Industrial Ethernet cables used in interconnecting Industrial Ethernet Switches, IP controllers, media convertors, distributed control system, programmable logic controller and transmitting industrial protocol data signals. These cables are suitable for transmitting 1000BASE‐TX Gigabit Ethernet, 100BASE‐T Fast Ethernet, 100BaseVG ANYLAN, 155ATM, 622ATM, RS‐422, 250MHz Category 6, EtherCAT. These are highly durable & ruggedized cables for both indoor and outdoor use meeting IEC 60332‐3‐25 Category D flame rating.
Physical Characteristics Electrical Characteristics
Conductor Size 23 AWGMax. Conductor DCR @ 20°C 9.38 Ω/100m
Conductor Material Solid Bare CopperCharacteristic Impedance 100 ± 15Ω
Insulation Material PO ‐ PolyolefinNom. Mutual Capacitance @
1KHz 5.6 nF/100m
Number of Pairs 4 PairsMax. Capacitance Unbalance 330 pF/100m
Shielding Aluminium Foil – Polyester
Tape with TC drain wire Nom. Velocity of Propagation 70%
Jacket Material PVC ‐PolyvinylchlorideMax. Intended Operating
Voltage Rating ‐ UL 300 V
Suitability Indoor and OutdoorMax. Delay @ 100MHz 538 ns/100m
UV/Sun Light Resistance Yes Max. Delay Skew 45 ns/100m
Oil Resistance YesDCR Unbalance @ 20°C Max. 5%
Flame Retardant IEC 60332‐3‐25 Category D
UL 1685 UL Loading
Mechanical Characteristics
Operating Temperature Range‐20°C To +75°C
UL Specification CMBulk Cable Weight 62 kg/km
Other Specifications ISO/IEC 11801 Class E
TIA/EIA 568‐C.2 Category 6
Max. Recommended Pulling
Tension 110 N
Nom. Diameter7.5 mmMin. Bending Radius (Install) 60 mm
